>>>Working process:
★1, The PET bottles are separated by screw and then entered into the bottle washing mechanism in turn. By clamping the bottle mouth, the bottles are reversed 180 degrees, so that the bottle mouth is down, spraying and washing the inside and outside of the bottle. The rinsing water used is pure water.
★2, Then it enters the balanced pressure filling mechanism. The bottle rises slowly with the lifting mechanism. After close contact with the sealing washer under the balance filling valve, the fork installed above the isobaric cylinder is activated. At this time, the gas inside the bottle begins to be filled.
★3, In the sealing part. The whole capping mechanism is cylindrical. It rotates 360 degrees according to the center of the spindle. The bottle is automatically capped, and then enters the capping mechanism.
>>>Our machine have so many characteristics:
★1, The system is simple: the integral table board is adopted, the structure is rigid, easy to wash and clean, easy to maintain, and the maintenance of the machine is more convenient and simple.
★2, Accurate alignment of bottles in filling process: unique filling with clamping mouth and pre-cover function of centering cover ensure accurate sealing between bottle mouth and filling valve mouth, eliminate le akage phenomenon, and really reduce the loss of finished materials.
★3, Accurate level control: the level in the filling cylinder is determined by the probe level meter, and the intake of the intake pipe is controlled automatically by the variable signal to ensure that the level in the cylinder is consistent throughout the filling process.
★4, Accurate speed regulation: Advanced motor frequency modulation control technology is used to make the speed regulation of the machine accurate and stable in start-up and production, and to display the filling speed digitally. The whole machine is controlled by PC program with high degree of automation.
★5, Structural hygiene: All parts in contact with beverages are made of high quality stainless steel, all liquid and gas pipes are polished inside and outside, and all seals in contact with beverages are made of nitrile rubber or silicone rubber for food, which meets the hygienic requirements.
★6, The structure of the capping machine is advanced: the capping head adopts magnetic capping, adjusts the required torque according to different caps, and is suitable for various types of plastic caps; the capping machine adopts tooth-shaped device, and the lower cap slideway is equipped with cap detection device to ensure that there is no back cap and no bottle without capping.
★7, Convenient and rapid change of bottle type: The quick-opening structure is adopted for the change parts, and the quick and convenient change of bottle type is suitable for PET bottles of various specifications.
